- auxiliary equipment
- covers
- equipment for locker rooms
- furniture and equipment for additional space
- referee outfit
- scoreboards and timing and scoring systems
- tribune, seats
Refereeing and timing systems for the short track
Manufacturer: Swiss Timing
Category: Refereeing and timing systems
Specifications:
Settings and integration of this system are highly dependent on the configuration of a sports facility.
Acoustic start device StartTime III
Manufacturer: Swiss Timing
Model: StartTime III
Category: Refereeing and timing systems for different races
Specifications:
Dimensions (main unit) : 376 x 215 x 195 mm (w/o connectors)
Dimensions (microphone) : 118 x 25 x 80 mm
Weight : 6.4 kg (without charger & mike)
Microphone cable length : 7 m
Connections : microphone, ARES, flash, speaker,
battery charger
Power supply : integrated 12V/7Ah lead—acid battery
Charger : included, indoor use only
Public adress speaker : up to 2 x 19 W output
Self—discharge time : 12 months if not in use
Battery indicator : 4 levels battery symbol
Battery autonomy : more than 1000 starts before recharge
Operating temperature : —10 to +65°C
Storage temperature : —20 to +65°C
Relative humidity : 20—80% (non—condensing)
ATHINA 4 sides shot clock Type 3400.996
Manufacturer: Swiss Timing
Model: SATURN ATHINA Type 3400.996
Category: scoreboard
Specifications:
Height (mm): 765
Width (mm): 695
Thickness (mm): 765
Weight (kg): 35
Power consumption (VA): 480
Characters * Lines * Panels: 4 + 2
ATHINA shot clock Type 3400.999
Manufacturer: Swiss Timing
Model: ATHINA shot clock Type 3400.999
Category: scoreboard
Specifications:
Height (mm): 680
Width (mm): 675
Thickness (mm): 114
Weight (kg): 120
Power consumption (VA): 120
Characters * Lines * Panels: 4 + 2
Button judge-timekeeper OIT3
Manufacturer: Swiss Timing
Model: OIT3
Category: Refereeing and timing systems
Specifications:
— The length of the spiral cable 3 meters;
— In the free position is open button;
— Connectors such as "banana"
Dustcleaner U-840
Made in: Sweden
Model: U—840
Category: equipment for sharpening skates
Specifications:
For removal of grinding dust and particles we recommend and sell the dustcleaner U—840, a welding fume eliminator produced by Nederman. It should be attached to SSM—2 and SSM PROFIL when sharpening to minimize the discharges. It has an exchangable filter (U—324) and keeps the same vacuum strength until the filter is full. A filter will be sufficient for approximately 2000 pairs of skates.
Dust extractor NQS500
Made in: Sweden
Model: NQS500
Category: equipment for sharpening skates
Specifications:
For removal of grinding dust and particles we recommend and sell the dust extractor NQS500, produced by Numatic. A dust extractor should be attached to our machines when sharpening to minimize the discharges. NQS500 uses a high quality motor which is extremely quiet and has two different suction levels (high or low). The engine is protected by two different filters. This model uses a real cyclon intake which maximize the spreading of dust inside the filter..
FLASH LED STARTING SIGNAL
Manufacturer: Swiss Timing
Model: Flash led
Category: Refereeing and timing systems
Specifications:
Dimensions (w/l/h) : 138 x 190 x 222 mm
Weight (without cable): 600 g
Power supply : 12 VDC (via STARTIME)
Power consumption : mA (peak during flash)
Flash reaction time: 1 ms
Duration of a flash: 48 ms
Minimum duration impulse: 50 ms
Polarity of the start impulse: normally closed
Cable length: 25 m
Operating temperature: 0 to +50°C
Storage temperature: —10 to +60°C
Flooring Elite 60
Company: Grabo
Model: Elite 60
Category: Flooring for indoor sport halls
Technicals Features:
Grabo Elite 60 is an indoor vinyl sport floorings sheet, assuring optimal adhesion on its surface through its embossing.
The backing foams provide an optimal combination of sport— and safety functions.
The glass fibre reinforced middle layer provides good dimensional stability to the product.
CLP system provides high wear resistance and easy maintenance to Grabo Sport Elite 60.
All of the Grabo products are made with solvent free technology.
Flooring Elite Wood 60
Company: Grabo
Model: Elite Wood 60
Category: Flooring for indoor sport halls
Technicals Features:
Grabo Elite 60 is an indoor vinyl sport floorings sheet, assuring optimal adhesion on its surface through its embossing.
The backing foams provide an optimal combination of sport— and safety functions.
The glass fibre reinforced middle layer provides good dimensional stability to the product.
CLP system provides high wear resistance and easy maintenance to Grabo Sport Elite 60.
All of the Grabo products are made with solvent free technology.