Made in: Sweden

Model: U—840

Category: equipment for sharpening skates

Specifications:
For removal of grinding dust and particles we recommend and sell the dustcleaner U—840, a welding fume eliminator produced by Nederman. It should be attached to SSM—2 and SSM PROFIL when sharpening to minimize the discharges. It has an exchangable filter (U—324) and keeps the same vacuum strength until the filter is full. A filter will be sufficient for approximately 2000 pairs of skates.

Made in: Sweden

Model: NQS500

Category: equipment for sharpening skates

Specifications:
For removal of grinding dust and particles we recommend and sell the dust extractor NQS500, produced by Numatic. A dust extractor should be attached to our machines when sharpening to minimize the discharges. NQS500 uses a high quality motor which is extremely quiet and has two different suction levels (high or low). The engine is protected by two different filters. This model uses a real cyclon intake which maximize the spreading of dust inside the filter..

Made in: Sweden

Model: H5

Category: equipment for sharpening skates

Specifications:
The classic original holder in a new shape which is small and flexible but still very stable. Weighs only 0.7 kg.
The favourite holder of many equipment managers. Can not grip skates with insufficient area between shoe and blade.

Made in: Sweden

Model: NM—11

Category: equipment for sharpening skates

Specifications:
Riveting machine NM—11 is primarily used for riveting skate blades, stretching boots, replacing eyelets and attaching shoe lace hooks. An advantage is that you can do all this with simple tool changes; this makes the machine easy to use. A new construction of the NM—11 has halved its weight to only 15 kg.

This riveting machine can be used on many different roller blades as well. The NM—11 can now also be used on ski boots together with the new tool holder V 30.

Made in: Sweden

Model: H8

Category: equipment for sharpening skates

Specifications:
Universal holder H—8 can grip almost any skate. It has a very stable construction and weighs 2.2 kg.

Made in: Sweden

Model: SSM—2/H10

Category: equipment for sharpening skates

Specifications:
SSM—2 is a manual skate sharpening machine with a stable construction. It is both fast and easy to use. Thanks to its low weight and using the transport case V—2, it is perfect to bring along to away games. There are several different skate holders to choose from, for icehockey skates, bandy skates, figure skates and touring skates.

This skate sharpener is now CE approved (220—240 V version) and ETL approved (110—120 V version)

Made in: Sweden

Model: SSM—2/H5

Category: equipment for sharpening skates

Specifications:
The machine with the holder of H5 to the point of hockey skates (1.5—4mm).

Made in: Sweden

Model: SSM—2/H8

Category: equipment for sharpening skates

Specifications:
H8 Machine with the holder for sharpening all types of skates.

Made in: Sweden

Model: SSM—2/SM6

Category: equipment for sharpening skates

Specifications:
This is a addition to new SSM—2 machines. It is used to profile the skate lengthwise by copying a suitable template (flat or radius). The SSM—2/SM—6 is a inexpensive alternative to today´s radius sharpeners. It has some limits though; it works well for a glide surface but should not be used for a profile that exceeds 12 cm in length.
Four standard templates of your choice is included and an extra skate holder (H—5 or H—10). This machine can be used as an ordinary SSM—2 as well.

Made in: Sweden

Model: SSM—2/T26

Category: equipment for sharpening skates

Specifications:
This is a new unit for figure skates. It uses two tables instead of a guide arm. SSM—T26 is used together with a SSM—2 to allow sharpening of all types of figure skating blades. SSM—T26 is mainly for figure skating clubs or stores specialized in figure skating.